Cat6 RJ45 ‘Easy’ Connector 10pk – Two Piece – for all Category 6 / cat5e types


    This fits your .

  • by entering your model number.
  • 10 Pack of two-piece variety RJ45 unshielded connectors
  • Compatible with solid and stranded conductors
  • Use with all Cat6 and Cat5e UTP cable types (inc. Rosenet Heavy Duty grades)
  • No special tools required, use with standard RJ45 crimpers and strain reliefs
  • For TECHNICAL SUPPORT on how to use this item please call 0345 0959493 or see fitting instructions in description below

Product description

Crimping RJ45 plugs can be fiddly, finicky and frustrating. These two-piece style connectors make things easier by making it a job of two halves; firstly, the individual conductors (arranged by colour in the usual manner and according to your desired wiring plan such as 568A/B) are slotted into the loading bar then trimmed flush. Then, the whole arrangement is pushed into the main connector body before being crimped using a standard RJ45 crimp tool – no special tool is required. Use with regular strain reliefs/boots.

Fitting instructions:
1. Strip jacket around two inches from the end of the cable
2. Untwist each pair – usually there are four pairs in standard network cable
3. Arrange in preferred colour order – usually orangewhite/orange/greenwhite/blue/bluewhite/green/brownwhite/brown
4. Snip off 1/4 inch from end of conductors to create a straight edge
5. Fit the loading bar with grooves facing upward, by sliding bar onto the conductors, pushing down all the way to cable jacket
6. Snip off protruding wire flush from leading edge of loading bar, as close as possible
7. Push the whole fitment into the main body of the connector with contacts facing up to match grooves in load bar, as far as possible
8. Crimp in the usual manner
– for help after purchase please call 0345 0959493


You may also like...